Vibratory Tumbler Machines & Equipment for Deburring & Polishing
Vibratory finishing machines and finishing systems produce a cutting action that is very thorough.
This finishing bowl has a media separator to sreen the parts from media, greatly improve the working efficiency and reduce labor cost.
Application & Advantage :
1. They remove material from pockets and recesses and inside bores, which cannot be done in a barrel tumbler, so they can be used for very delicate or intricate parts.
2. With high speeds and a short stroke, they can also run large bulky parts without damage.
3. Large wing spans and landing struts are routinely run in these systems.
4. Vibratory finishing systems also lend themselves to be automated easily.
5. They can be fully automated for a flow-through operation or used as a basic batch operation.
6. The action is that of a small orbit at a high speed and thus is very powerful, yet causes little stress on the parts.
Vibratory Polishing Machine Standard Models for Choice
Model |
Capacity(L) |
Motor |
Speed |
Amplitude |
Rubber |
Weight |
Size |
power(kw) |
(r/min) |
(mm) |
lining(mm) |
(kg) |
L*W*H(mm) |
KF-40(A) |
40 |
0.55 |
1450 |
0.8-3 |
6-12 |
65 |
600*500*600 |
KF-60(A) |
60 |
0.75-1.1 |
1450 |
0.8-3 |
6-12 |
100 |
700*640*700 |
KF-80(A) |
80 |
1.1 |
1450 |
0.8-3 |
6-12 |
110 |
840*640*740 |
KF-95(A) |
95 |
1.1 |
1450 |
0.8-3 |
6-12 |
125 |
860*800*750 |
KF-150(A) |
150 |
2.2-3.0 |
1450 |
0.8-4 |
6-15 |
380 |
1150*1050*900 |
KF-150(AB) |
150 |
2.2-3.0 |
1450 |
0.8-4 |
6-15 |
380 |
1150*1100*900 |
KF-150B |
150 |
2.2-3.0 |
1450 |
0.8-4 |
6-15 |
380 |
1150*1100*900 |
KF-250A |
250 |
3 |
1450 |
0.8-6 |
6-20 |
550 |
1350*1200*950 |
KF-250AB |
250 |
3 |
1450 |
0.8-6 |
6-20 |
550 |
1350*1200*950 |
KF-350(B) |
350 |
5.5 |
1450 |
0.8-6 |
6-20 |
800 |
1500*1350*1050 |
KF-350(A) |
350 |
5.5 |
1450 |
0.8-6 |
6-20 |
800 |
1450*1350*1050 |
KF-350(AB) |
350 |
5.5 |
1450 |
0.8-7 |
6-20 |
800 |
1450*1350*1050 |
KF-450(B) |
450 |
5.5 |
1450 |
0.8-7 |
6-20 |
1000 |
1450*1350*1050 |
KF-450(A) |
450 |
5.5 |
1450 |
0.8-6 |
6-20 |
1000 |
1550*1430*1050 |
KF-450(AB) |
450 |
5.5 |
1450 |
0.8-7 |
6-20 |
1000 |
1600*1430*1050 |
KF-650(A) |
650 |
7.5 |
1450 |
0.8-8 |
6-20 |
1500 |
1900*1850*1300 |
KF-650(B) |
650 |
7.5 |
1450 |
0.8-8 |
6-20 |
1500 |
1850*1800*1400 |
KF-650(AB) |
650 |
7.5 |
1450 |
0.8-8 |
6-20 |
1500 |
2000*1850*1300 |
The vibratory tumbling machine is used for surface cleaning industrial parts, such as removal of impurities, grease, thermal oxide, contaminants, rust and so on, also widely applied in deburring aluminum or zinc alloy castings, the thickness and location of the burrs can be precisely controlled.