| After-sales Service: | 1 Year Warranty |
|---|---|
| Warranty: | 1 Year Warranty |
| Drive: | Electric |
| Principle: | Press-in |
| Control: | Artificial |
| Layout: | Horizontal |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Dry suction sandblasting machine
This suction blast machine is designed for abrasive blasting small parts or components. It is an economical blasting equipment that achieve general surface finishing purpose, such as stripping paint process, derusting, deburring, cleaning etc.
The small sandblaster is suction sandblasting type, which uses the compressed air to flow in the spray gun to produce negative pressure. The abrasive in the cyclone separator is sucked into the gun through the hose and then blasted from the nozzle to the workpiece surface.
Dry suction sandblasting machine conponents
Sandblasting chamber, spray gun, table, dust removal device and cyclone sand transport system, electronic control system, air source system.
Is based on compressed air as the driving force to abrasive as the medium, the workpiece for spraying processing equipment.
| Dimension: | length1130mm *width700mm*height1650m |
| Working size: | length900mm *width600mm*height650m |
| Dust collector size | 430 mm * 380 mm * 1500 mm |
| Dust collector power | 0.75KW 220V 50HZ |
| Number of guns: | 1 (boron carbide, 8mm nozzle) |
| Operating opening: | 1 pair gloves |
| Power: | 220V / 50HZ / 550W |
| Working pressure: | 2-7bar |
| Machine lighting: | 220V 13W energy saving lamp |
| Dust removal method: | cartridge filter type |
| Air source requirements: | pressure 7bar (kg / square meter) |
| Required Flow: | 0.8-1.2 m3 / min |
| Body material: | 2mm cold-rolled plate (powder coated surface, durable and long life) |
Dry suction sandblasting machine applications:
1, cleaning heat treatment pieces, welding parts, castings, forgings, such as oxide, residual salt and welding slag, clean-up quality can reach Sa3 level.
2, cleaning machine plus parts of the micro-burr, surface residues and so on.
3, can be used as the workpiece surface coating, pre-plating pretreatment process, available active surface, improve coating, coating adhesion.
4, can be used to improve the physical and mechanical properties of the workpiece surface, such as changing the surface stress state, with the occasion to improve the lubrication conditions, coupled with the movement to reduce the noise.
4. The blasted abrasives will impact and grind with the surface, in which way remove the impurities, old paints oxide layer and other contaminants, results in a smooth and clean surface for subsequent procedure.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}